What’s Required for Installation?

• So you’ve chosen your shed and you want it assembled and that’s where our installers come in.
• So there are no surprises on the day please read the following information about what is required.
• Although we will make every effort to accommodate requests, these are best made in advance so there is no delay in the assembly service or unexpected surprises on the day.
• Please understand that our standard pricing is simply for the assembly of a retail product and nothing else (our installers are not builders, carpenters or electricians).

Our prices for installation make the following assumptions:

1. There is clear access to the garden or assembly site.

2. It’s not further than 40 meters from the delivery point to the assembly point. Although we can move the shed from one point to another for you, the price quoted only allows for a certain amount of time.

Long distances like rear access from further down a street, etc. will take more time that has not been quoted for in the standard price.

3. The ground is flat (not sloping for base kits).

4. A solid and suitable base is in place and that base is both flat and level (for more information please see our Foundation Base Guide

5. Delivery and installation may not be on the same day.

6. There is access (min 60cm) all around the final install position (the install team will need to get to all sides of the shed to properly install the roof).

7. Electricity must be available upon request.

8. There is parking or a suitable loading/unloading area at the assembly address

with free parking close by. Permit holders only roads will require you to provide a permit.

9. Unless agreed in advance a person over the age of 18 must be available at the time of assembly.

 

The customer is responsible for and understands the following:

1. We are unable to carry a shed through your property. If a shed or garden building must be taken through a home then you will need to have done this already before the assembly team arrives or upon arrival.

2. IIf the assembly person or team arrives to find the base is not suitable, parts are missing or damaged, the job may not be able to go ahead on that day, but the booking will still have to be paid in full.

2.1 Should your job be aborted for any reason listed under point 2. Then a new job will need to be raised for us to revisit.

3. If we are asked to and agree to install on a base that is not suitable, then we do so on the understanding that you acknowledge this may affect the look and functionality of the building and we will not be held liable for issues that arise as a result.

4. The installer(s) are unable to carry out other jobs or repairs for you while they are there.

5. If you have pets, the area must be free of any mess and properly cleaned before the assembly takes place.

6. We may ask for dogs to be kept away from the area while the assembly is taking place.

7. Any trees, bushes, etc. that are overhanging must be cut back prior to our arrival.

8. Grass must be reasonably short around the assembly site.

9. Manholes and drains in the area must be covered, free from mess and clean.

10. If any additional jobs are carried out for you at your request these will be chargeable at £80 + VAT per hour (chargeable in 1-hour increments).

 

Assembly of timber base kit assumes the following

1. The ground is not more than 3 inches off level across the entire span of the base.

2. The area is not partly paved, concrete, blocks, bricks or anything that will have to be removed before assembly.

Note: We are unable to perform any groundworks.

 

Area Coverage

Our shed and garden building installation service covers most of the UK. Please see the coverage map image.

If you have any questions about coverage please don’t hesitate to get in touch.